The Cyber-Hacks List uses version 1.94.3+ of Majordomo.
If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message.
Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives.
You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo@UserHome.com". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line.
You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself.
If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word
end
on it in the same place. This will stop the Majordomo software from processing your signature as bad commands.
Here are some of the things you can do using Majordomo:
To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo@UserHome.com:
lists
Each line will contain the name of a mailing list and a brief description of the list.
To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "cyber-hacks", you would put the line
info cyber-hacks
in the body of the mail message.
Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings.
To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name:
subscribe cyber-hacks
or you can use the shorter command of "subscibe":
sub cyber-hacks
If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "cyber-hacks" mail at your personal account (for which we will use "jqpublic@my-isp.com" as an example), you'd put the line
subscribe cyber-hacks jqpublic@my-isp.com
in the mail message body.
Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo@UserHome.com. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request.
Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo@UserHome.com:
If you go on vacation or if you can't read your emails and you don't want your mailbox to be filled with messages from the mailing list you are subscribed to, then you can use this command to temporarily stop receiving mail from the list. If you want to get off forever, then please use the unsubscribe command. Send the followng command in the mail message body to Majordomo@UserHome.com:
set cyber-hacks nomail
If you are subscribed with an email address other than the one from which you are sending this email, then you can use:
set cyber-hacks nomail jqpublic@my-isp.com
NOTE: This command may not work, if the list owner has disabled this feature.
When you wish to begin receiving list mail again, then sent the following command in the message body to Majordomo@UserHome.com:
set cyber-hacks mail
If you are subscribed with a different email address than the one from which you are sending email, you can use the following command:
set cyber-hacks mail jqpublic@my-isp.com
Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name:
unsubscribe cyber-hacks
Or Majordomo@UserHome.com also understands the shorter command of "unsubscribe":
unsub cyber-hacks
(This command may fail if your provider has changed the way your address is shown in your mail.)
To remove an address other than the one from which you're sending the request, give that address in the command:
unsubscribe cyber-hacks jqpublic@my-isp.com
In either of these cases, you can tell Majordomo@UserHome.com to remove the address in question from all lists on this server by using "*" in place of the list name:
unsubscribe *
unsubscribe * jqpublic@my-isp.com
NOTE: There is a space between the word "unsubscribe" and the "*"!
To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo@UserHome.com:
which
You can look for other addresses, or parts of an address, by specifying the text for which Majordomo should search. For instance, to find which users at my-isp.com are subscribed to which lists, you might send the command
which my-isp.com
Note that many list owners completely or fully disable the "which" command, considering it a privacy violation.
If the mailing list to which you are subscribed to is a high usage list, it means many messages per day will be sent to the subscribers. If you tire of reading all those messages or prefer to not fill up your mailbox continuously, then it would be the best for you to receive mail in digest mode from your mailing list.
NOTE: This is only available if a digest mode of your mailing list exists. You can verify this by looking at the lists output. If your list has "(D)", then a digest list is available.
You can easily change to digest mode, if you send the following command in the body of an email to Majordomo@UserHome.com:
set cyber-hacks digest
If you want to receive regular mail again, use:
To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list:
who cyber-hacks
Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation.
Many list owners keep archives of files associated with a list. These may include: - back issues of the list - help files, user profiles, and other documents associated with the list - daily, monthly, or yearly archives for the list
To find out if a list has any files associated with it, use the "index" command:
index cyber-hacks
If you see files in which you're interested, you may retrieve them by using the "get" command and specifying the list name and archive filename. For instance, to retrieve the files called "profile.form" (presumably a form to fill out with your profile) and "cyber-hacks.9611" (presumably the messages posted to the list in November 1996), you would put the lines
get cyber-hacks profile.form
get cyber-hacks cyber-hacks.9611
in your mail to Majordomo@UserHome.com.
To contact a human site manager, send mail to Majordomo-Owner@UserHome.com. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for cyber-hacks@UserHome.com, you would send mail to cyber-hacks-approval@UserHome.com.
To get another copy of this help message, send mail to Majordomo@UserHome.com with a line saying
help
In the description below items contained in [ ]'s are optional. When providing the item, do not include the [ ]'s around it. Items in angle brackets, such as <address>, are meta-symbols that should be replaced by appropriate text without the angle brackets.
It understands the following commands:
subscribe [cyber-hacks] [<address>]
or
sub [cyber-hacks] [<address>]
Subscribe yourself (or <address> if specified) to the named
cyber-hacks.
unsubscribe [cyber-hacks] [<address>]
or
unsub [cyber-hacks] [<address>]
Unsubscribe yourself (or <address> if specified) from the
named cyber-hacks.
unsubscribe *
Remove yourself (or <address>) from all lists.
This
may not work if you have subscribed using multiple addresses.
set [cyber-hacks] nomail [<address>]
Temporarily stops mail from cyber-hacks.
set [cyber-hacks] mail [<address>]
Starts receiving mail again from cyber-hacks.
set [cyber-hacks] digest [<address>]
Changes your subscription of cyber-hacks to digest mode (if available).
set [cyber-hacks] nodigest [<address>]
Changes your subscription of cyber-hacks back to regular mail.
get [cyber-hacks] <filename>
Get a file related to cyber-hacks.
index [cyber-hacks]
Return an index of files you can "get" for cyber-hacks.
which [<address>]
Find out which lists you (or <address> if specified) are on.
who [cyber-hacks]
Find out who is on the named cyber-hacks.
info [cyber-hacks]
Retrieve the general introductory information for the named cyber-hacks.
intro [cyber-hacks]
Retrieve the introductory message sent to new users.
Non-subscribers
may not be able to retrieve this.
lists
Show the lists served by this Majordomo server.
help
Retrieve this message.
end
Stop processing commands (useful if your mailer adds a signature).
Commands should be sent in the body of an email message to " Majordomo@UserHome.com" or to "cyber-hacks-request@UserHome.com".
The cyber-hacks parameter is only optional if the message is sent to an address of the form "cyber-hacks-request@UserHome.com". Multiple commands can be processed provided each occurs on a separate line.
Commands in the "Subject:" line are NOT processed.
If you have any questions or problems, please contact "Majordomo-Owner@UserHome.com".